Determine Availability

There are several factors that affect availability. Below the different factors are listed with links to information about each one.

((http:www.yocom-mckee.com/wiki/Factors1aAnd1b?v=60v Factors 1a & 1b))

((http:www.yocom-mckee.com/wiki/Factor1c?v=1ekf Factor 1c))

((http:www.yocom-mckee.com/wiki/Factor2a?v=1ekf Factor 2a))

((http:www.yocom-mckee.com/wiki/Factor2b?v=1ekf Factor 2b))

Factor3

View Availability~/Utilization

Click the Availability~/Utilization tab to set the calculation method and to view results of your chosen factors and weights. By default, the Two Standard Deviation test is chosen, but you can view results using the Any Difference or 80% Rule tests. Please remember to select Two Standard Deviation after viewing the results of different tests if you wish to publish the Availability Reports using Two Standard Deviation. The test selected on this tab is the one the software will use when the Availability Reports are published. The Restore Report Option Defaults button will not change the test used to create the Availability Reports.

file:jgavailutiltab.png

Notes

Click the Notes tab if you wish to enter comments about a selected Job Group. Please remember that what ever is typed in the notes box will be printed as a footnote on the Availability Report.

file:jgnotestab.png